Exhaust Tomos A3 / A35 28mm Tecno Bos Fuego chrome

Exhaust Tomos A3 / A35 28mm Tecno Bos Fuego chrome 

• Chrome.
• Tomos A3 / A35 / Standard / Quadro / Flexer / Luxe / Wizz'rd / Taxxity / Califone / Limited / various models
• 28mm outer diameter manifold
• Use long brass exhaust nuts for easily mounting!
• Exhaust mounting to frame Euro1 model, do you have a frame mounting with 2 holes? Order a Euro2 exhaust bracket along (see related products)
  

Tips:

• Always use a new exhaust gasket when fitting an exhaust. Order a 2nd exhaust gasket along, sometimes with the Tecno Bos it is necessary to fit a 2nd gasket because the exhaust just wants to hit the footpegs slightly.
  
• Use our long brass M6 nuts in combination with hardened studs (see related products). This so you can easily and fully tighten the exhaust flange. Brass is also softer than steel, so it will not seize.
• We recommend fitting this exhaust with 2 exhaust gaskets. This is because the mounting flange of the exhaust may be slightly crooked, causing the exhaust to not seal properly with 1 gasket.
  

When using all exhausts, black painted, chrome and blanc exhausts, heat build-up at the exhaust manifold can cause the following:

• At black outlets the paint can dissolve a little.
• Chrome and blanc exhaust manifolds may discolour

If the nozzle is too small or if the ignition is set incorrectly, the exhaust port becomes very hot and discoloring and dissolve of the paint on the exhaust manifold will occur faster than a perfectly adjusted engine. We give no guarantee on discoloration or solving of the paint on the exhaust manifold!

Dimensions:

• A: 160mm
• B: 620mm
• C: 24mm
• D: 28mm
• E: 6mm