Exhaust Tomos A3 / A35 28mm M-Pipes 65cc / 70cc inner rotor raw Euro1

• M-Pipe hand made exhaust system, made in Holland
  
• 28mm manifold
• This handmade exhaust is calculated and made for a Tomos A35 with 65cc / 70cc cylinder and a inner rotor ignition!
• So for example a Airsal or DMP 65cc or 70cc for example in combination with a HPi or PVL.
• The best and fastest exhaust for an A35 with 65cc / 70cc currently on the market. Exhaust is also very silent!
• Removable silencer.
  
• Euro1 model (pictured is a Euro2 model, but it is for Euro1)

Tips:

• Use our long brass M6 nuts in combination with hardened studs (see related products). This so you can easily and fully tighten the exhaust flange. Brass is also softer than steel, so it will not seize.
• Always use a new exhaust gasket when fitting an exhaust

When using all exhausts, black painted, chrome and blanc exhausts, heat build-up at the exhaust manifold can cause the following:

• At black outlets the paint can dissolve a little.
• Chrome and blanc exhaust manifolds may discolour

If the nozzle is too small or if the ignition is set incorrectly, the exhaust port becomes very hot and discoloring and dissolve of the paint on the exhaust manifold will occur faster than a perfectly adjusted engine. We give no guarantee on discoloration or solving of the paint on the exhaust manifold!