M-Pipes hand made exhaust system, made in Holland
- Tomos A3 / A35 / Standard / Quadro / Flexer / Luxe / Wizz'rd / Taxxity / Califone / Limited / various models
- 28mm manifold
- With black heat resistant coating
- This handmade exhaust is calculated and made for a Tomos A35 with a fast 50cc cylinder and a inner rotor ignition or a 65cc / 70cc with a stock ignition.
- So for example a Airsal / DMP 50cc for example in combination with a HPi or PVL or a 65cc / 70cc cylinder with stock ignition.
- The best and fastest exhaust for an A35 with these cylinders currently on the market. Exhaust is also pretty silent!
- Removable silencer.
- Euro2 model, with an Euro1 model it is possible that you need to modify the bracket a little bit.
Tips:
- Use our long brass M6 nuts in combination with hardened studs (see related products). This so you can easily and fully tighten the exhaust flange. Brass is also softer than steel, so it will not seize.
- Always use a new exhaust gasket when fitting an exhaust
When using all exhausts, black painted, chrome and blanc exhausts, heat build-up at the exhaust manifold can cause the following:
- At black outlets the paint can dissolve a little.
- Chrome and blanc exhaust manifolds may discolour
If the nozzle is too small or if the ignition is set incorrectly, the exhaust port becomes very hot and discoloring and dissolve of the paint on the exhaust manifold will occur faster than a perfectly adjusted engine. We give no guarantee on discoloration or solving of the paint on the exhaust manifold!
Dimensions:
- A: 180mm
- B: 860mm
- C: 26mm
- D: 28mm
- E: 7mm