Dellorto PHBG 17mm carburetor Black racing replica

Replica Dellorto PHBG Black racing 17mm carburettor.

• Connection diameter of the manifold 24mm
• Connection diameter of the air filter 32mm
• Nozzles/jets suitable for this carburettor are Dellorto 5mm jets/nozzles
• Carburettors are delivered with a blanc nozzle/jet.
• Carburettors should always be cleaned before installation.
• Cable choke control.
• Insertion carburettor 24mm connection. Fast nozzle exchange by the drain bolt on the float chamber.
• Throttle drum cover is also screwable.
• Rubber for connection is availble at the section replacement parts.

Note:

• The float bowl is fixed with 4 bolts, 3 long ones and 1 short one. Always make sure you replace the short bolt on the corner of the air set screw! If you screw a longer bolt in here, it will hit the air set screw and block it.
• The jet that is mounted in the carburettor / set is blank and different for each batch. (The manufacturer does this because they cannot know on which engine / setup this carburettor will be mounted). It is therefore highly advisable to order a jet-set so that you can always achieve maximum adjustment.

With a matching manifold applicable to various Tomos models:

• Tomos A3, A35, Quadro, Standard, Luxe, Flexer etc.

With a matching manifold also universally usable for:

• Kreidler Florett  / RMC /  RM /  Zundapp / Yamaha DT / TY / Honda MT / MB / MBX / NSR / MTX / NS1 / Kawasaki AR / Suzuki TSX / TS /  Puch / Maxi / E50.