Dellorto PHBG 17.5mm carburetor replica with manifold and foam filter
Carburettor set with a PHBG 17.5mm model carburettor, 19mm manifold and racing foam filter. Ideal for a Tomos with 65cc or 70cc setup! This set fits perfectly behind the side cover with only small modification of the cover.
Set contains:
- Dellorto PHBG 17.5mm replica carburetor
- 19mm manifold (modified version, now plug & play!)
- Air filter 32mm power 45 degrees angled black
Manifold information
- Connection outer diameter: 24mm
- Inner diameter: 19mm
- Use 1x loose M5x25 stud and 3x socket head bolts for mounting manifold for this or adjust the manifold slightly for easy mounting.
Carburetor information
- Model as Dellorto PHBG, very good replica.
- Hand choke model
- Connection diameter of the manifold 24mm
- Connection diameter of the air filter 32mm
- Nozzles/jets suitable for this carburettor are Dellorto 5mm jets/nozzles
- Carburettors are delivered with a blanc nozzle/jet.
- Carburettors should always be cleaned before installation
Note:
- This set does not fit with Tomos E-starter!
- The carburettor will be very slightly tilted after mounting, this does not affect operation.
- Use 1x loose M5x25 stud and 3x socket head bolts for mounting manifold for this or adjust the manifold slightly for easy mounting.
- Do not overtighten your carburetor to your manifold, as this may cause the clamp to break. No warranty when you have overtightening the clamp!
- The float chamber is mounted with 4 bolts, 3 long and 1 short. Always ensure that you always place the short bolt on the corner of the air adjustment screw! If you screw in a long bolt here, it will hit the air adjustment screw and block it!
- The jet that is mounted in the carburettor / set is blank and different for each batch. (The manufacturer does this because they cannot know on which engine / setup this carburettor will be mounted). It is therefore highly advisable to order a jet-set so that you can always achieve maximum adjustment.