Exhaust Tomos A55 28mm RS cigar chrome
- Well known RS cigar exhaust but now for Tomos with A55 cylinder, exclusive at Tomoshop
- 3 pieces: RS cigar silencer, 30mm exhaust clamp and 28mm exhaust manifold
- Exhaust manifold has a angled flange!
- Subtle looks, very fast and not so loud
- Euro1 mounting bracket
Tomos models with A55 cylinder
- Tomos Roadie, Revival / Streetmate / Funtastic / Youngst'R A55
Note:
- Use the RS cigar exhaust in combination with the universal exhaust mount shock absorber support , this is because the muffler is quite thick and may not fit the footpegs (support is not included, see related products)
- Some center stands may not work because of the thickness of the silencer
Tips:
- Shorten the exhaust manifold length yoursel to the desired length for easy fitting and the best performance.
- Use our long brass M6 nuts in combination with hardened studs (see related products). This so you can easily and fully tighten the exhaust flange. Brass is also softer than steel, so it will not seize.
- Always use a new exhaust gasket when fitting an exhaust
When using all exhausts, black painted, chrome and blanc exhausts, heat build-up at the exhaust manifold can cause the following:
- At black outlets the paint can dissolve a little.
- Chrome and blanc exhaust manifolds may discolour
If the nozzle is too small or if the ignition is set incorrectly, the exhaust port becomes very hot and discoloring and dissolve of the paint on the exhaust manifold will occur faster than a perfectly adjusted engine. We give no guarantee on discoloration or solving of the paint on the exhaust manifold!