Headlight egg-model 130mm GUIA large model custom powdercoat (choose your color)

Headlight egg-model 130mm large model black GUIA custom powdercoat (choose your color)

Available to order, your new parts powder coated in a colour of your choice. In the product options you will find a number of selected colours in which this part can be powder coated for a small extra charge. Is your desired colour not listed here? Then contact us and we will help you out!

• Color: black primer, overpaintable with chrome edge
• Diameter lamp: 130mm
• Lamp length: 170mm
• Suitable for 60mm speedometer
• Fitting for a BAX 15D lamp
• On picture 5 you can see the difference with the standard 102mm Egg headlight

Please note: only a 60mm odometer with built-in odometer light will fit in this headlight. An odometer with a protruding fitting will not fit as it will touch the bulb fitting in the headlight. Maximum counter height: 52mm

Dimensions:

• A: M6
• B: 130mm
• C: 90mm
• D: 130mm

Note:

• The part will be custom-made for you, returning it is therefore not possible.
• Order as many colour parts as possible in one order. Although powder coating is usually based on fixed (RAL) colours, a minimal colour difference is always possible.
• The delivery time of a colour powder-coated component is a maximum of 14 working days. If you order powder-coated parts in combination with other parts, we will send your order when the whole order is complete.
• A colour on a screen can always differ slightly from reality, please take this into account. Do you want a part in a specific (RAL) colour? Do your own research to see if this is the right colour for you.
• Check all holes before mounting, if necessary clear them very slightly due to the powder coating.